KCB gear pump

发布时间:2019-06-22浏览次数:54
  • KCB gear pump is suitable for conveying lubricating oil or other liquids with similar properties to lubricating oil without solid particles and fibers, whose temperature is not higher than 300, viscosity is It can be used as a transmission and booster pump in the oil transportation system......

KCB series gear pump performance range:

Pressure range:1.45MPa

Flow range: 580m3/h

Temperature range: 300

The viscosity range is: 5 ~ 1500mm2/s, and the speed can be reduced to 50000mm2/s.

 KCB.jpg

Structural features of KCB series gear pumps:

This series of gear pumps are mainly composed of gear, shaft, pump body, valve, shaft end seal (special requirements, optional magnetic drive, zero leakage structure). The gear has high hardness and strength through heat treatment and is installed with the shaft in the commutable shaft sleeve. The lubrication of all parts in the pump is automatically achieved by using the output medium when the pump works. 

The pump has a reasonable design of oil drain and return groove, is the gear in the work of the torque bearing force is small, so the bearing load is small, wear is small, pump efficiency is high.

The pump is equipped with a safety valve as overload protection. The full return pressure of the safety valve is 1.5 times the rated discharge pressure of the pump. It can also be adjusted according to actual needs within the allowable discharge pressure range. But note that this safety valve can not be used as a pressure reducing valve for a long time.

Viewed from the extension of the spindle to the pump, it rotates clockwise.

 

KCB series gear pump uses:

It is suitable for transporting lubricating oil without solid particles and fibers, temperature not higher than 300 C, viscosity 5×10 - 6 1.5×10 - 3 m2 / s (5 - 1500 cSt) or other liquids similar to lubricating oil.

Reduce the speed of the pump, the viscosity of the conveying medium can reach 50000mm2/s.

KCB.jpg 

KCB series gear pump application area:

It can be used as transmission and booster pump in oil transportation system.

It can be used as fuel pump for conveying, pressurizing and spraying in the fuel system.

It can be used as lubricating oil pump in all industrial fields.

 


标签:全部
网友评论

管理员

该内容暂无评论

美国网友

河北恒盛泵业股份有限公司微信扫码 关注我们

  • 24小时咨询热线

    24小时咨询热线+86 0000 96877

  • 电话

    移动电话+86 0000 96877

Copyright © 2018 河北恒盛泵业股份有限公司 地址:这里是您的公司地址 备案号:冀ICP备15018643号 网站地图百度 / 谷歌

技术支持:永灿北京 [永灿北京] 统计代码放置